Jordan Journal of Mechanical and Industrial Engineering
ISSN: 1995-6665

Contents of Number 3

Experimental Study of Solar Air Dryer Performance Utilized with Flat and Perforated Absorber Plates

Ghadeer Q. Fadhil, Sarmad A. Abdul Hussein

https://doi.org/10.59038/jjmie/190301

Electrical and Mechanical Behavior of Chromium Disilicide Thin Films on Polyethylene Terephthalate under Tensile Strain

Atif Alkhazali, Mohammad M. Hamasha, Sa’d Hamasha, Ibrahim Salem Alkhazali, Raghad Massadeh

https://doi.org/10.59038/jjmie/190302

Analysis of Discharge Behaviour and Heat Generation at in the 18650 Lithium Ion Battery Cell            

Kanhaiya P. Powar*, Sharad D. Patil

https://doi.org/10.59038/jjmie/190303

Experimental Analysis of Pressure Drop Behavior in Jet-Driven Vortex Chambers Across a Wide Range of Aspect Ratios

Ali M. Jawarneh

https://doi.org/10.59038/jjmie/190304

Investigating the Effects of Fused Deposition Modeling Parameters on Carbon Fiber-Reinforced PLA Performance            

Manel Dhouioui, Boutheina Ben Fraj, Wissem Zghal, Hamdi Hentati1, Mounir Ben Amar, Mohamed Haddar

https://doi.org/10.59038/jjmie/190305

Integrated Approach for Energy Conservation and Efficiency Enhancement of Cooling and Air Conditions in Industrial Operations: A Sustainable Design for Yemen

Wael Bakil Ali Hashed, Jagadeesh Pasupuleti, Johnny Koh Siaw Paw, Mokhtar Ali Amrani

https://doi.org/10.59038/jjmie/190306

Enhancing COP in R600a Refrigerators by dispersing CuO/SiO₂ Nanolubricants: A machine Learning Prediction

A. Senthilkumar

https://doi.org/10.59038/jjmie/190307

Application of CUSUM Control Charts in Maintenance Activities

Ghada Shwaheen, Mohammad M. Hamasha

https://doi.org/10.59038/jjmie/190308

Analysis of Mechanical and Electrical Responses in Molybdenum Silicide Thin Film Laid on PET During Tension Application

Atif Alkhazali, Mohammad M. Hamasha, Sa’d Hamasha, Ibrahim Salem Alkhazali, Khalid Alzoubi, Mustafa Rawashdeh, Raghad Massadeh

https://doi.org/10.59038/jjmie/190309

Fatigue Analysis of Polyester Composite Plate Reinforced with Carbon Fiber and Nano Silicon Dioxide

Raed  Naeem  Hwayyin, Ahmed Salman Hammood, Azhar Sabah Ameed

https://doi.org/10.59038/jjmie/190310

Sound Absorption Properties of Oil Palm Fibre–Polylactic Acid-Based Micro-Perforated Panels with Compatibilizer

WMA Wan Mamat Ali, Zaidi Mohd Ripin, L. E. Ooi1, M.Z.A Thirmizir, C. K. Abdullah

https://doi.org/10.59038/jjmie/190311

The Effect of Non-Conductive Al2O3nano Powder with Flushing Pressure on Electrical Discharge Machining Characteristics

Isam Qasem

https://doi.org/10.59038/jjmie/190312

Natural Fiber Epoxy-Based Composite Ballistic Impact Performance Capabilities for Armor System Design: A Comprehensive Review

Mohammed T. Hayajneh, Mu’ayyad M. Al-Shrida, Mohammed A. Almomani,Faris M. AL-Oqla

https://doi.org/10.59038/jjmie/190313

Bromination Effects on the Dynamic Behavior of Graphite Platelet and CTBN Vinyl Ester Reinforced Nanocomposites

Ahmad Almagableh

https://doi.org/10.59038/jjmie/190314

Analysis and Control of Vehicle-Driver Coupled System Post Tire Blowout: A Linear Quadratic Gaussian Approach  

Ahmad Alshyyab, Mahdi Al-Quran, Mohammad Arafa, Omar Nasleh

https://doi.org/10.59038/jjmie/190315

Optimization of Performance and Economic Viability in Trans-critical CO2 Air Conditioning Systems Incorporating Solar-Powered Mechanical Subcooling

Mohammad Tarawneh, Ahmad Bani Yaseen, Lina AL-Zahrani, Hitham Tlilan

https://doi.org/10.59038/jjmie/190316

Effects of Saw Blade Geometry on Oil Palm Frond Cutting 

Umesh Ganesh, Zaidi Mohd Ripin, Wan Mohd Amri Wan Mamat Ali, And Mohamad Ikhwan Zaini Ridzwan

https://doi.org/10.59038/jjmie/190317

Metaheuristic Approaches for Flexible Lot-sizing and Scheduling with Remanufacturing and Sequence-dependent Setup Time 

Arezoo Osati, Esmaeil Mehdizadeh,S adoullah Ebrahimnejad

https://doi.org/10.59038/jjmie/190318