Boards
Editorial
Preface
Contents of Number
1
Combined Solar-Geothermal
Power Generation using Organic Rankine Cycle.
Ahmad Sakhrieh, Waleed
Shreim, Hatem Fakhruldeen, Hasan Hasan, Ahmed Al-Salaymeh. |
Multi-Objective
Optimization of Electrical Discharge Machining Processes Using
Artificial Neural Network
J. Anitha, Raja Das,
Mohan Kumar Pradhan
|
The Effect of Adding
Different Percentages of Manganese (Mn) and Copper (Cu) on the
Mechanical Behavior of Aluminum
Lina M.
Shehadeh , Issam S. Jalham
|
Using DEA Window Analysis
to Measure the Efficiencies of Blowing Machines in Plastics
Industry
Abbas Al-Refaie
, Ruba Najdawi, Erin Sy |
Optimal Design of PV System
in Passive Residential Building in Mediterranean Climate
Samar Jaber,
Ali Abul Hawa |
|
|
Computational modeling of
gaseous flow and heat transfer in a wavy microchannel.
Aiman Alshare,
Wael Al-Kouz, Suhil Kiwan,Ammar Al-khalidi, Montasir Hader |
Contents of Number
2
Contents of Number
3
Nonlinear Natural
Frequencies and Primary Resonance of Euler-Bernoulli Beam with
Initial Deflection using Nonlocal Elasticity Theory.
Ma'en S. Sari
, Ahmad Al-Qaisia.
|
Parallel Translating
Mechanism Process-Oriented Mathematical Model and 3-D Model for
Cylindrical Gears with Curvilinear Shaped Teeth
CHANG Qinglin,
HOU Li
|
Multimode Input
Shaping Control of Flexible Robotic Manipulators Using
Frequency-Modulation
Ziyad Masoud ,
Mohammad Nazzal , Khaled Alhazza |
OPTIMIZATION OF
VOLUMETRIC WEAR RATE OF AA7075-TiC METAL MATRIX COMPOSITE BY
USING TAGUCHI TECHNIQUE
V.RamakoteswaraRao , N.Ramanaiah , M.M.M.Sarcar |
Greenhouse Gas
Emissions Reduction Potential of Jordan's Utility Scale Wind and
Solar Projects
Nidal Hussein |
Load Characteristics of
Pick Cutting Coal Seams with Coal and Rock Interface
Chenxu Luo,
Shuangxi JING , Xiaoming HAN , Yu LIU , Changlong Du |
Improving Mixing in
Water Aeration Tanks Using Innovative Self-Powered Mixer and
Power Reclamation from Aeration Tank
Ammar A. T.
Alkhalidi , Patrick Bryar , Ryo S. Amano
|
Novel Approach to
Enhance the Performance of Production Systems Using Lean Tools
Hazem Kaylani
, Ahmad Almuhtady , Anas M. Atieh
|
Contents of Number4
Synthesis and
Characterization of Epoxy Matrix Composites Reinforced with
Various Ratios of TiC.
Malek Ali. |
The Impact of Large Scale
Photovoltaic Systems on the Harmonic Increase in Distribution
Networks
I. Etier, M.
H. Abderrazzaq, A. Al Tarabsheha, , O.A. Saraereh, M. AlBdour
|
Improving Surface Quality
of AA 6351 by the Stiff Burnishing Technique
Anil
Sureshchandra Maheshwari , Rupesh Ratnakar Gawande |
Two-Dimensional Analysis
of Low Pressure Flows in the Annulus Region between Two
Concentric Cylinders with Solid Fins
Wael Al-Kouza
, Suhil Kiwanb, Aiman Alshare, Ahmad Hammad, Ammar Alkhalidi |
Investigation of the
Flowability and the Thermal Behavior of Sand /Basalt-Mixture in
Moving Bed Heat Exchanger (MBHX) as Heat Transfer Medium for
Concentrating Solar Tower Plants
Louy Qoaider,
Suhil Kiwan, Qahtan Thabit
|
Pad Cratering: Reliability
of Assembly Level and Joint Level
Mazin H.
Obaidat, Osama T. Al Meanazel, Mohammad A. Gharaibeh , Hesham A.
Almomani
|
Parametric Study for a
Reciprocating Screw Blow Injection Molding Process Using Design
of Experiments Tools.
Khalid Alzoubi
|
Radiative Boundary Layer
Flow and Heat Transfer of Nanofluid over a Nonlinear Stretching
Sheet with Slip Conditions and Suction
T. Vijaya
Laxmi , Bandari Shankar . |
|
<< Back >>




|